| Mounting Type | Direct Mount |
|---|---|
| Service Life | ≥1000000 Times |
| Working Intervel | 35cm |
| Pressure Range | 0.5-2.5Mpa |
| Temperature Range | 0-200°F |
| Surface Treatment | Smooth |
|---|---|
| Pressure Rating | 150 PSI |
| Flow Direction | Unidirectional |
| Media | Air |
| Material | Rubber |
| Features | Aging Resistance |
|---|---|
| Media | Air |
| Diameter | 5-1500mm |
| Flow Direction | Unidirectional |
| Temperature Range | 0-100 Degrees Celsius |
| Material | Rubber |
|---|---|
| Body Material | Stainless Steel |
| Operation Mode | Normally Closed |
| Pressure Range | 0-100 Psi |
| Operating Pressure | 0-100 Psi |
| Material | NR/NBR/CR/FR/PTFE/PTFE+EPDM |
|---|---|
| Farbe | Schwarz oder besonders angefertigt |
| Größe | Entsprechend der Zeichnung des Kunden |
| Anwendung | General |
| Form | Besonders angefertigt |
| Haltbarkeit | Hoch |
|---|---|
| Leckrate | 0,05% |
| Anwendung | Ventil |
| Lebensdauer | 5-10 Jahre |
| Material | Gummi |
| Druck-Strecke | 0-10 Stange |
|---|---|
| Produktbezeichnung | Impulsventilmembran |
| Farbe | schwarz, weiß, rot, etc. |
| Größe | Individualisiert |
| Eigenschaften | Hochleistungsfähigkeit, Langlebigkeit usw. |
| Widerstand | Hoch |
|---|---|
| Oberfläche | Schlank |
| Farbe | Weiß |
| Lebensdauer | Mehr als eine Million Zyklen |
| Form | angepasst |
| Größe | Individualisiert |
|---|---|
| Druckbereich | 0.5-2.5Mpa |
| Oberflächenbehandlung | Schlank |
| Form | Runde |
| Struktur | Zwerchfell |
| Flow Rate | High Flow Rate |
|---|---|
| Fluid | Air, Water, Oil |
| Sealing | Good Sealing |
| Serie | QBY |
| Diaphragm Material | Nitrile Rubber |